Tuesday, March 19, 2024
22.4 C
Melbourne

IS YOUR LIGHT BULB NOT TURNING ON AFTER CHANGING IT? HERE’S WHAT YOU SHOULD DO

Mick Pacholli
Mick Pachollihttps://www.tagg.com.au
Mick created TAGG - The Alternative Gig Guide in 1979 with Helmut Katterl, the world's first real Street Magazine. He had been involved with his fathers publishing business, Toorak Times and associated publications since 1972.  Mick was also involved in Melbourne's music scene for a number of years opening venues, discovering and managing bands and providing information and support for the industry. Mick has also created a number of local festivals and is involved in not for profit and supporting local charities.        

Electric lights and fixtures can stop working anytime, and it can happen, especially when you are in the middle of something important. There are professionals who provide the right solution for your problem like the Sydney electrician. The life of some light bulbs is short, but even new bulbs can stop working. Faulty light bulbs can be changed and replaced, but sometimes even changing them doesn’t work.

When light bulbs and fixtures come with reliability, we take it for granted. It is always a wonderful idea to keep a backup plan and not to unthinkingly rely on their warranty. When a trusty light fixture or bulb fails there are a few things responsible for it, the bulb itself, the switch, the circuit breaker and the wiring need to be checked. Socket failure can also be the reason.

Here are a few reasons for the unresponsive light bulb. If the problem is minor, you can handle it by yourself, and safety should be your priority before getting to work.

  1. Recheck Your wall switch

A loose fixture can also be the reason why your bulb is not working. To make sure recheck that the fixture has been plugged appropriately or not. When the wall switches get old, they stop working, the button that presses the metal to complete the circuit flow loses its connection. If it’s a lamp, then check both the switches, lamps are attached to the mains socket, and they have a separate button on the wire, take a tester to check if the power flow is constant.

  1. Check Your Circuit breaker

With the fluctuation of voltage the circuit breaker automatically turns off and sometimes the fuse is blown. To be sure about this, try to switch ON other appliances in your room first. If the circuit breaker is off, you can simply turn it ON, and your light bulb will start working. There is a possibility that the power is down only in one room; this happens when you plug in a device or appliance that puts pressure on the mainline of the room. This is why the breaker turns off, and the bulb stop working.

  1. Check Your Light bulb For Defects

It is not necessary that your light bulb needs a replacement. When the bulb gets loose from its fixture it is turned off, give the bulb a twist to see if works. The average age of bulbs is not quite less, and in areas where voltage fluctuations are an issue, it gets worse. If you have a tungsten wire bulb, it becomes easy to check if the bulb has issues. The broken wire inside the bulb means it is damaged.

  1. Check The Socket Tab

If a bulb is not working, you can switch off button switch or gently take out the plug. When the contact between the bulb and the metal slab or tab is lost inside the bulb socket, your bulb won’t work. When the metal is adjusted, the current flow is revived, and your bulb will work just fine. For safety always turn off the switching before touching the metal. Some bodies absorb electric shocks more than others, don’t risk your life while dealing with electric devices.

  1. Check The Wiring

After checking the above procedures if it still doesn’t work, then focus more upon wiring. Some fixtures with inline switches come inside a plastic casing, the wire clamps onto the cord. If it is mishandled or falls, the fixture starts making noise. When these sounds start, take it as an alarm. You should immediately check and change the cord. These can create a spark and tend to fail other fixtures, and you should call an electrician if you can’t deal with it. You need to turn off the switch before handling any of the wire and cords.

  1. Handle The Cord With Care

Static cords and hanging cords easily come loose from their fixtures. To avoid this, you should always handle the cord with care, too much pressure on the cord can damage the wiring. Hanging cords get pulled while working or cleaning; one should fold them before working around them. Move the cord position and see if your light bulb works. When the light works after moving the cord, it means at some point there is a breakage in the line.

  1. Check The Socket For Current

A circuit tester is the best option for checking the power. To see if the current flow is consistent touch the tester to a metal socket and the other to metal screws of the bulb. The lighter in the tester is a sign of current flow. If the light in the tester does not blink, then you should repair or change the socket.

  1. Change The Wall switch and Fixture Cable

The switch and fixture cable connection might break due to a bad or loose wire. When the wall switch and fixture are heated up, it might start melting.

  1. Fixture Wiring

If there is nothing wrong with the fixture and the current in it, then focus on the socket terminals only. The fixture wiring gets fried up due to several reasons, and when there is extra load on the wire, it cannot bear the voltage flow. Check your fixture wiring after turning off the switch, and it is very important to think of safety first. The hot and naked wire can burn your hand and is hazardous.

  1. Faulty Circuit Cable

There are chances that your circuit cable will have issues if you have checked every spot and there are no issues inside the house. You will have to call an electrician to deal with this.

The Final Word

Sometimes the bulb doesn’t turn ON even after changing it, and there are many reasons behind it. Faulty switches, unattached cords, loose wires and broken switches are some of the reasons. Always follow the standard safety rules before handling live wires.

Image Source

Mick Pacholli

Mick created TAGG - The Alternative Gig Guide in 1979 with Helmut Katterl, the world's first real Street Magazine. He had been involved with his fathers publishing business, Toorak Times and associated publications since 1972.  Mick was also involved in Melbourne's music scene for a number of years opening venues, discovering and managing bands and providing information and support for the industry. Mick has also created a number of local festivals and is involved in not for profit and supporting local charities.        

- Advertisement -
  • auto draft
  • tagg gig guide - add event
- Advertisement -
  • best in travel australia - sidebar 600x300
  • cocktails 300x600
- Advertisement -

CONTINUE READING